Garmin 60LMT construction delay alerts question

Discussion in 'Garmin GPS' started by Shoptek, Mar 23, 2021.

  1. Shoptek

    Shoptek

    Joined:
    Mar 23, 2021
    Messages:
    1
    Likes Received:
    0
    Hello all---
    When I click the "X" to close the pop-up window on the right, it reopens either immediately or within 5 seconds. I obviously have acknowledged there is an incident ahead, so is there a way to stop this pop up from appearing over and over and over again?
    I want to keep the alerts for construction and traffic active, I just do not need to be constantly reminded after I've closed the pop-up.
    Thank you in advance for any and all suggestions!

    20210320_193637.jpg
     
    Shoptek, Mar 23, 2021
    #1
  2. Shoptek

    Nuvi-Nebie Moderator

    Joined:
    Aug 16, 2015
    Messages:
    2,407
    Likes Received:
    202
    Location:
    UK
    If you are travelling on the same Route every day you will be aware of the contruction delays so you could turn the alerts off, if they are appearing on different Routes each day then you would have to wait for the 'Remaining' distance to count down to zero but at 69 MPH that would only take 2.5Mins. I don't think there is an alert refresh delay, also at that speed, I don't think I would be looking at the satnav every 5 seconds
     
    Nuvi-Nebie, Mar 24, 2021
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. New DriveSmart 60LMT - Change Voices & Vehicles?

  2. Drive 60LMT Memory Card

  3. 60LMT-S with reversing camera

Loading...