GPSmap60CSx broken on/off switch

Discussion in 'GPS Technical Discussion' started by bjorn, Oct 14, 2020.

  1. bjorn

    bjorn

    Joined:
    Oct 14, 2020
    Messages:
    1
    Likes Received:
    0
    I have an old GPSmap60CSx where the on/off switch is broken. This means that I can not get my waypoints ("flags") out from it so I can copy them into a new GPS. Any tips to what I can do about this?
     
    bjorn, Oct 14, 2020
    #1
  2. bjorn

    Nuvi-Nebie Moderator

    Joined:
    Aug 16, 2015
    Messages:
    2,477
    Likes Received:
    209
    Location:
    UK
    Some data is stored on the microSD card which can be removed and then read on a computer, however as far as I know waypoints are stored in internal memory on the GPSmap60, some units like the GPSmap64 will auto power up when connected to a computer via the USB connector, but the GPSmap60 must be turned on using the on/off switch, so the only option I can see is opening up the GPSmap60 unit and fixing (or temporarily bypassing) the on/off switch
     
    Nuvi-Nebie, Oct 14, 2020
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Garmin 3590....won't turn off with car ign. switch

Loading...