Lane Assistant - 265W

Discussion in 'Garmin GPS' started by allawi, Mar 10, 2017.

  1. allawi

    allawi

    Joined:
    Mar 10, 2017
    Messages:
    1
    Likes Received:
    0
    I have Garmin 265W. It had problem with the cable which has the traffic receiver so I replaced it with standard cable with no traffic receiver. It works fine with me since I bough it.


    My question is how can I add ‘Lane Assistant’ feature. Is there an upgrade, firmware, or specific file to add/delete to get it?


    I have another newer Garmin GPS that has all features. Can I use some of the files there to copy to the new one to enable this feature?


    I have not done that much work to the GPS other than adding new North America maps to SD card and use it in my 265W.
     
    allawi, Mar 10, 2017
    #1
  2. allawi

    Nuvi-Nebie Moderator

    Joined:
    Aug 16, 2015
    Messages:
    2,345
    Likes Received:
    201
    Location:
    UK
    Lane assist is 'built-in' to maps, so can only be added/removed by changing the map, here is a reply from Garmin about North American maps,
    Junction View is supplied with maps as a *.jcv file, but this does not contain Lane View info.
     
    Nuvi-Nebie, Mar 11, 2017
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. NEED HELP Nuvi 265W

  2. Repurposing a Garmin Nuvi 265W

  3. Garmin Nuvi 265W trouble shoot help

Loading...