MobileMapper Office Post-Processing

Discussion in 'GPS Software' started by levik2007, Dec 26, 2020.

  1. levik2007

    levik2007

    Joined:
    Dec 26, 2020
    Messages:
    2
    Likes Received:
    0
    Hello!

    I use the Magellan MobileMapper Office 3.40 version software for receive differential corrections after mapping our agricultural fields with Thales MobileMapper GPS receiver.

    Recently I can't succeed to do that, probably because changing the CDDIS security requirements:

    "US Government security requirements no longer permit CDDIS to offer data via traditional unencrypted anonymous ftp; this service was discontinued on October 31, 2020. All data are still available, however access must be via HTTPS or ftp-ssl."

    I will very glad if you will help me with the issue.

    My operating system: Windows 10 Pro


    Thanks in advance
     
    levik2007, Dec 26, 2020
    #1

    1. Advertisements

  2. levik2007

    Nuvi-Nebie Moderator

    Joined:
    Aug 16, 2015
    Messages:
    1,503
    Likes Received:
    124
    Location:
    UK
    Nuvi-Nebie, Dec 26, 2020
    #2

    1. Advertisements

  3. levik2007

    levik2007

    Joined:
    Dec 26, 2020
    Messages:
    2
    Likes Received:
    0
    Yes, I have. It did not help. Moreover, I contacted the CDDIS support department - to no avail.
     
    levik2007, Dec 26, 2020
    #3

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Post processing - Leica

  2. MobileMapper 6 accuracy

  3. Magellan mobilemapper cx software/firmware

  4. Post processing GNSS data on Android phone for improved location accuracy

  5. Needed - A GPS that can calculate trips between Post Office Addresses

  6. What is GPS Post Processing?

Loading...