Nuvi 550 Disassembly

Discussion in 'Garmin GPS' started by Loopie, Feb 28, 2019.

  1. Loopie

    Loopie

    Joined:
    Sep 19, 2012
    Messages:
    10
    Likes Received:
    0
    Any chance anyone knows how to disassemble a Nuvi 550. I need to replace the digitizer. I pried on the front face a little and didn't like the sound I was hearing :)

    Loopie
     
    Loopie, Feb 28, 2019
    #1
  2. Loopie

    Nuvi-Nebie Moderator

    Joined:
    Aug 16, 2015
    Messages:
    2,345
    Likes Received:
    201
    Location:
    UK
    Here are some notes I found on the net for Nuvi 500 disassembly, please note I have not done this myself so I can't say if it is correct :-

    1. Remove battery (if installed) from back.
    2. Pry off front face (small flat head screwdriver)
    3. Remove screen (front) from back panel (8 torx screws)
     
    Nuvi-Nebie, Feb 28, 2019
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
There are no similar threads yet.
Loading...