Oregon 600 packed up on me.

Discussion in 'Garmin GPS' started by Amtor, Mar 17, 2018.

  1. Amtor

    Amtor

    Joined:
    Mar 17, 2018
    Messages:
    2
    Likes Received:
    0
    Hello All
    My Oregon 600 is busted.
    It gets hot around that cracked component with the "C" written on it. I have some surface mount soldering equipment but was wondering is there are any schematic diagrams available anywhere. I would be nice to have a look at the circuit there.
    Maybe a voltage regulator problem. Thanks for any info.
    20180317_125559.jpg
     
    Amtor, Mar 17, 2018
    #1
  2. Amtor

    Nuvi-Nebie Moderator

    Joined:
    Aug 16, 2015
    Messages:
    2,336
    Likes Received:
    200
    Location:
    UK
    You might have more luck looking into general circuit diagrams using the Texas Instuments 98044A1 chip, I found an Ebay sale with the title :-
    I also found some links from the 98044A1 to the TI TPS51225 device although this is a 20 pin device rather than 32 pin
     
    Nuvi-Nebie, Mar 18, 2018
    #2
  3. Amtor

    Amtor

    Joined:
    Mar 17, 2018
    Messages:
    2
    Likes Received:
    0
    Thanks for the info I will check that out.
     
    Amtor, Mar 18, 2018
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.