sim808 responds slowly with urduino uno

Discussion in 'General GPS Discussion' started by tito2, Aug 23, 2021.

  1. tito2

    tito2

    Joined:
    Aug 23, 2021
    Messages:
    1
    Likes Received:
    0
    Hi members,
    I have used sim808 with urduino uno but the AT commands are not read in the order I have put in code. When I send a message for instance with "AT+CMGL=\"REC UNREAD\"", it only reads a section of the message and the later reads the other part of the message. Anyone who knows about how to fix this?
     
    tito2, Aug 23, 2021
    #1
  2. tito2

    Nuvi-Nebie Moderator

    Joined:
    Aug 16, 2015
    Messages:
    2,345
    Likes Received:
    201
    Location:
    UK
    I think you will get better answers if you ask an Arduino forum this question, it is probably too specialised for this one :-

    https://forum.arduino.cc/
     
    Nuvi-Nebie, Aug 23, 2021
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. GPS position slowly drifting

Loading...